This is our shop description. This is our shop description.
The MoVi Pro is a professional handheld 3-axis digital stabilized camera gimbal that has redefined the possibilities for camera movement.
The MoVI M5 is the smallest and lightest load carrying gimbal stabilizer in the Freefly line up. It can hold a small camera package, up to 5lbs.
6″ vacuum/ suction cup camera mount with silver metal mount. Perfect for film and video cameras, scopes and camcorders with a standard 1/4-20 thread receptacle base.
A sophisticated 3-axis gimbal stabilizer that can hold camera packages up to 15lbs. Both single and dual operator modes available.
Save your back by using an Easyrig with your camera or gimbal. Redistributes the weight from your neck and shoulders to your hips.
Camera support system that is designed for use with handheld video cameras. A cost effective way to get stable, handheld shots with cameras weighing less than 10 lbs.
This EasyRig 300N helps to redistribute the weight from cameras so that handheld camera operators to not get fatigued as quickly. Holds 11-17lbs.
The eyeSpy line of DSLR rigs are ideal for any filmmaker who wants a shoulder-mounted ergonomic support system for their DSLR.
The Element Mantis is a highly customsizable handheld rig that is suitable for multiple cameras. Fast switching from tripod to handheld.
This porta-jib is a light weight, yet heavy duty jib. It is designed to carry up to a 100lb camera package and can be assembled in just 5 minutes.
This rugged slider is made with heavy duty speedrail and is perfect for larger, heavier cameras like the RED One, or Arri Alexa.
A compact camera slider that can be packed in a small bag or backpack yet still allows for a full 2 feet of movement. Can be mounted on a tripod or used on the ground.
Sophisticated speed rail slider that is designed to give you a small dolly move with minimal setup. Can a hold a camera package up to 100lbs.
Sturdy, portable and versatile. Plus it just looks sexy. Comes with base, high and mid-level telescopic posts, low mode adapter, 4ft. slider and sliding base.
The Cartoni JIBO is a great lightweight, compact jib arm. It breaks down in to three sections to make it easier to transport.
This 33 foot jib includes a pan-tilt-roll-head, operator, and wireless follow focus. It can hold camera packages up to 35 lbs.
This slider is lightweight and ideal for travel. It is 3′ long and can hold up to 15lbs. The elektraDrive motion controller is also included.
Kessler’s Oracle Control System is a fully electronic motion control system that is perfect for your next motion controlled timelapse project.
The Kessler Parallax is an add on for Kessler Cinesliders. It allows for automatic panning and fixed-point shooting capabilities.
The Kessler 5 foot CineSlider is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds.
The Kessler 3 foot CineSlider is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds.
The Steadicam Scout can handle camera package weights between 5 to 18 lbs. Ideal for cameras like the C300 and RED Packages.
The new Steadicam Pilot is a state of the art, lightweight stabilizer system designed especially for the modern breed of lightweight cameras from 2 to 10 pounds.
The DJI Ronin-M is the little brother to the Ronin stabilizer. Holds camera packages up to 8lbs and weighs half as much as the original.
A handheld, 4K 3-axis gimbal stabilizer. Uses DJI’s Zenmuse X3 camera to capture 4k up to 24fps, HD up to 120fps.
The DJI Ronin is a 3-axis gimbal stabilizer. It can hold anything from a 5D up to a RED EPIC. DJI boasts a “5 minute set-up and balance”.
This Sachtler Fluid Head Tripod has an 18-step counterbalance that can be adjusted easily and safely in 9 stages and permits 90 degree tilt angles.
Weight: 7.7 lb Payload: 44 lb Counterbalance: 7 steps Balance plate: 110 mm / 4.4″ Grades of drag: 7 horizontal 7 vertical and 0 Tilt range: ±90° even with max.
The DV6SB can support and balance cameras from 2 to 20lbs in a compact, lightweight head. Like everything Sachtler makes, the tripod is tough as nails and reliable.
The DV 10 SB is Sachtler’s smallest 100mm fluid head tripod. It has twelve steps of counterbalance and can hold up to 26 lbs.
The 7 7 is a 100mm tripod that can hold a camera package and accessories up to 48 lbs.
The O’Connor 2575 Head with Standard and Baby Legs and a Mitchell Mount Hi-Hat is the gold standard for tripod support.
Heavy duty fluid head tripod. Can hold camera packages up to 41 lbs. Great for heavier packages such as Arri Alexas, REDs, and other large cameras.
A compact 4-section aluminum fluid monopod. It has a fluid head and allows for smooth panning and tilting movements.
The Manfrotto 529B enables you to get shots from the lowest possible position. Features adjustable leg angles to mount the camera in the tightest or lowest of locations.
Fluid Head Manfrotto 504 Tripod. Supports 16.5 lbs.
With payload capacity of 13.2 lb (6 kg, the 503 fluid head is designed to support the latest range of professional digital cameras.
Manfrotto 502 Fluid Head Tripod. Supports 12.2 lbs.
The Libec H38 Professional Fluid Head offers fixed counterbalance, silky-smooth fixed fluid drag, and a convenient, industry-standard 75mm leveling ball.
A fluid head tripod that can hold up to a 26lb camera pacakge. Compact and lightweight, it is ideal for ENG, News, or similar productions.
11318 Santa Monica Blvd.Los Angeles, CA 90025(310) 277-6900[email protected]